Back
Published Apr 1, 2020
In Commercial Construction

CHALLENGE ACCEPTED


550-USt Liebherr LTM 1450-8.1 all-terrain crane by 44-story office building

Urban settings can be tough environments in which to operate a crane. A recent project in downtown Chicago highlighted seemingly every conceivable hardship inherent to city work, yet each was overcome thanks to diligence, teamwork, and careful planning.

It began when managers of a 44-story office building in the city’s central business district needed to add two new generators to the building to accommodate a new tenant. A seemingly simple call to action, of course assuming you have a crane with enough muscle and boom length to get the generators lifted into place. However, the challenges included tight quarters (bounded on three sides by other buildings), overhead obstructions from these neighboring buildings, concern about street traffic, uncertainty about ground stability, and the unpredictability of Chicago’s winter weather.   

Central Contractors Service, a member of the ALL Family of Companies, and a staple of the Chicagoland crane scene since the 1940s, provided the crane for the lifts. Central worked closely with Mike Walsh and his team at Dearborn Engineers & Constructors, the heavy-lift and engineering consultant on the project.

550-USt Liebherr LTM 1450-8.1 all-terrain crane

Central specified a 550-USt Liebherr LTM 1450-8.1 all-terrain crane for the work. It was configured with 52 feet of main boom, 138 feet of luffing jib, and 295,400 pounds of counterweight.

The generators arrived at the jobsite on trailers, which were parked in an alley next to the high rise. The alley was a scant 18 feet across. From here, the operator would pick and hoist each unit to the top of a four-story section of the building, where they would be installed. 

Each generator weighed 52,000 pounds and was 40 feet long, 13 feet high, and 10 feet wide. Due to the narrowness of the alley, the crane’s operator had only three-and-a-half feet of clearance on each side, made even more potentially treacherous due to Chicago’s windy reputation.

Dearborn Engineers conducted extensive analysis of the site in the weeks leading up to the lifts, including use of drones, ground-penetrating radar, and 3-D laser scanning. The methods provided a full view of the workspace from above, all sides, and even underground.

The preparation proved invaluable to the ultimate success of the job. Dearborn’s mapping and analysis aided Central in selecting the ideal positioning of the crane among the restrictive confines. Every inch mattered, as there was just six feet of clearance on one side for the luffing jib to swing with each generator.

Another result of the pre-lift planning was discovery of the need to place underground supports beneath the surrounding sidewalk. In older cities, basements sometimes extend beyond the footprint of the visible structure, which was the case here. The network of undergirding strengthened the ground above to ably support the weight of the crane and its load.

The preliminary work created the best possible lift environment in what could have been problematic in less capable hands. The operator from Central Contractors Service picked and set both generators precisely and safely. The job was even completed several hours ahead of schedule, remarkable considering the host of hurdles that had to be cleared. 

 

About ALL

The ALL Family of Companies is the largest privately held crane rental and sales operation in North America, operating under the ALL, ALT, Central, Dawes, and Jeffers names. For a rental quote: 800-232-4100 or www.allcrane.com.